ARC Stud Welders
Find out details and information about a wide assortment of quality CD and ARC Stud Welders and Welding Systems, from the Pro-weld 212-512 series and the Betterman 308-318 series CD Stud Welding systems to the Pro-weld 656-3000 series ARC Stud Welding systems.
Pro-Weld ARC-656
The Pro-Weld ARC-656 is a compact lightweight stud welding power supply capable of welding studs thru 1/2” diameter reduced weld base. The power supply which operates on three phase power produces a smooth, stable welding arc. The front panel digital display indicates the weld time which is infinitely adjustable for preciseness and repeatability. The expanded time range provides fine adjustment of weld time for special short cycle applications such as welding to thin material. A specially designed electronic gun control circuit has been incorporated to increase overall reliability. If a fault condition occurs due to a shorted gun solenoid or a faulty control cable, the circuit will prevent gun retriggering and eliminate damage to printed circuit boards.
Pro-Weld ARC-800
The Pro-Weld ARC-800 is a compact and portable stud welding power supply capable of welding studs through 1/2” diameter weld base. The power supply which operates on single phase power has the added feature of weld current regulation that improves stud welding consistency. Both the weld time and weld current are infinitely adjustable for preciseness and repeatability. A specially designed electronic gun control circuit has been incorporated to increase overall reliability. If a fault condition occurs due to a shorted gun solenoid or a faulty control cable, the circuit will prevent gun retriggering and eliminate damage to printed circuit boards.
Pro-Weld ARC-1200
The Pro-Weld ARC-1200 is a compact and portable stud welding power supply capable of welding studs thru 5/8” diameter weld base. The fully regulated power supply which operates on three phase power produces a smooth, stable welding arc. Both the weld time and weld current are infinitely adjustable for preciseness and repeatability. For maximum flexibility the weld time can be switched between two ranges. The expanded short time range provides fine adjustment of weld time for special short cycle applications such as welding to thin materials.
Pro-Weld ARC-1850
The ARC-1850 is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units. Stick welding and Arc air gouging processes are available only as an option. An added feature in the ARC-1850 is the ability to dial in the desired weld time and weld current before even making a weld. By selecting the setup mode, the weld time and current can be adjusted and displayed on the front panel digital meters. It is capable of welding studs from 12ga to 7/8” diameter with preciseness and repeatability.
Pro-Weld ARC-3000
The ARC-3000 is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units. An added feature in the ARC-3000 is the ability to dial in the desired weld time and weld current before even making a weld. By selecting the setup mode, the weld time and current can be adjusted and displayed on the front panel digital meters. It is capable of welding studs from 1/4” to 1-1/4” diameter with preciseness and repeatability.
Tru-Weld TW-1200 ARC Stud Welder
The Tru-Weld TW-1200 ARC Stud Welder is an easy to operate stud welding system with two basic controls; time and current. This system can meet all of your stud welding requirements from the smallest to the largest diameter stud. The ease of set up makes this a perfect system for anyone to use. Included in this stud welding system are the Power supply, TWE18500 stud gun, 50 feet of 2/0 weld and control cable, and 25 feet of 2/0 ground cable w/clamp
Tru-Weld SC-2000 ARC Stud Welder
The Tru-Weld SC-2000 ARC Stud Welder is an easy to operate stud welding system with two basic controls; time and current. This system can meet all of your stud welding requirements from the smallest to the largest diameter stud. The ease of set up makes this a perfect system for anyone to use. Included in this stud welding system are the Power supply, TWE17000 Heavy Duty stud gun, 50 feet of 4/0 weld and control cable and 25 feet of 4/0 ground cable w/ HD clamp
Tru-Weld SC-2400 ARC Stud Welder
The Tru-Weld SC-2400 ARC Stud Welder is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units. An added feature in the ARC-3000 is the ability to dial in the desired weld time and weld current before even making a weld. By selecting the setup mode, the weld time and current can be adjusted and displayed on the front panel digital meters. It is capable of welding studs from 1/4” to 1-1/4” diameter with preciseness and repeatability.
Tru-Weld SC-3400 ARC Stud Welder
The Tru-Weld SC3400 Arc Stud Welder is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units. An added feature in the SC3402 is the ability to dial in the desired weld time and weld current before even making a weld. By selecting the setup mode, the weld time and current can be adjusted and displayed on the front panel digital meters. It is capable of welding studs from 1/4” to 1-1/4” diameter with preciseness and repeatability.
Tru-Weld SC-3402 ARC Stud Welder
The TWE SC3402 is a fully-integrated, dual-gun, stud welding system with two digital controls for time and current. The system was designed to meet the most challenging stud welding jobs to include weld thru-deck applications (this also includes G90 decking). Included in the SC3402 Arc Stud Welder is a 3000 amp power supply, two (2) TWE17000 Heavy Duty stud guns, two (2) cable sets of 50 feet of 4/0 weld and control cable, and 25 feet of 4/0 ground cable w/ HD clamp.